How do I fix error code E CS on my LG LF29H8330B?

1. undefined: Check for a loose or disconnected connector between Main PCB and convertible room sensor (CON8 pins 18–17). If disconnected, reconnect or repair. 2. undefined: With power off, measure resistance at CON8 pins 18–17. If 0 Ω (short), replace the convertible sensor. 3. undefined: With power off, measure resistance at CON8 pins 18–17. If infinite (open), go to step 6. 4. undefined: Compare resistance against the temperature/resistance table. If out of spec, replace the sensor. 5. undefined: If resistance is correct, the sensor is functioning normally — explain to customer. 6. undefined: Check the physical sensor connection. If connection is normal, replace the refrigerator. If connection is abnormal, reconnect or repair.

LG LF29H8330BRefrigerator

Error Code E CS

Convertible (Pantry) Room Sensor Error

Moderate

Address soon - your appliance may not work properly

How to Fix

1
Check for a loose or disconnected connector between Main PCB and convertible room sensor (CON8 pins 18–17). If disconnected, reconnect or repair.
2
With power off, measure resistance at CON8 pins 18–17. If 0 Ω (short), replace the convertible sensor.
3
With power off, measure resistance at CON8 pins 18–17. If infinite (open), go to step 6.
4
Compare resistance against the temperature/resistance table. If out of spec, replace the sensor.
5
If resistance is correct, the sensor is functioning normally — explain to customer.
6
Check the physical sensor connection. If connection is normal, replace the refrigerator. If connection is abnormal, reconnect or repair.